Route Table Manager (Rtm) - Patton electronics SmartNode Series Software Configuration Manual

6 • System image handling
The available command set is shown in
Command
? Displays the main menu with available commands, domains and active sessions.
help Displays a list of the commands available in the current domain.
boot Restarts the system.
div d s Diverts the output of domain d to another session s, i.e. to Telnet interfaces.
sd d Switches to another domain. You can display the available domains in the main
menu by entering "?". The "d = 0" command invokes the Route Table Manager;
"d = 1" invokes the Download Agent; "d = 2" invokes the Diagnostics.
quit/quit s Terminates the current session/the session at Telnet interfaces.

Route Table Manager (RTM)

To access the Route Table Manager, type sd 0.
70
table 5.
Table 5. Main shell command set
Function
Figure 15. Main shell
SmartWare Software Configuration Guide
Bootloader (for SmartNode 1000 and 2000 Series)