Configure Number Prefix For Isdn Number Types - Patton electronics SmartNode Series Software Configuration Manual

33 • Call router configuration
Mode: Context CS
Step
1
node (ctx-cs)[ switch ]#
digit-collection timeout timeout
2
node (ctx-cs)[ switch ]#
digit-collection terminating-char char
or
no digit-collection terminating-char
Example: Configure address completion timeout
SN[switch]#digit-collection timeout 3
SN[switch]#digit-collection terminating-char *
Configures the digit collection timeout to 3s. The digit-collection timeout can be stopped by the user entering
the asterisk (*) character.
Configure number prefix for ISDN number types
The called and calling party numbers in an ISDN signaling message are of a defined number type; national,
international or unknown. Depending on where the message originates (PSTN, mobile network, PBX) this
number type may differ.
Type
unknown
national
international (country code) (area code) (local extension number)
The missing prefix in the national and international number types can complicate the call router configuration,
so SmartWare offers the possibility to expand these numbers before entering the first call router table.
Note
The configured prefix is not removed at the exit of the call router (i.e. when
a destination interface is found), but the number has the numbertype
unknown.
Procedure: To configure number prefix
368
Command
Table 15 illustrates the three number types.
Table 15. ISDN number types
Format Description
as dialed with all leading zeros or other prefix numbers 0041 99 888xxxx
(area code) (local extension number)
SmartWare Software Configuration Guide
Purpose
Configures the digit collection timeout by specify-
ing the timeout in seconds. If not configured, the
default digit collection timeout is 5 seconds.
Configures the digit collection terminating charac-
ter by specifying the char . This can be any charac-
ter out of 0123456789*#. The default
terminating character is the pound (#). You can
also use this command in the no-form to disable
that the user can stop digit collection by a termi-
nating character.
99 888xxxx
41 99 888xxxx
Call router configuration task list
Example