Compliance Information; Radio And Tv Interference; Ce Notice; Eu Declaration Of Conformity - Patton electronics SmartNode Series Software Configuration Manual

Compliance Information

Interference
and TV
Radio
The SmartNode series of products generate and use radio frequency energy, and if not installed and used prop-
erly—i.e. in strict accordance with the manufacturer's instructions—may cause interference to radio and televi-
sion reception. The SmartNode devices have been tested and found to comply with the limits for a Class A
computing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed
to provide reasonable protection from such interference in a commercial installation. However, there is no
guarantee that interference will not occur in a particular installation. If a SmartNode series device does cause
interference to radio or television reception, which can be determined by disconnecting the unit, the user is
encouraged to try to correct the interference by one or more of the following measures: moving the computing
equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment
into a different AC outlet (such that the computing equipment and receiver are on different branches).

CE Notice

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromag-
netic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). A
Certificate of Compliance is available by contacting Technical Support.

EU Declaration of Conformity

EU Directives covered by this declaration
89/336/EEC
72/23/EEC
Note

The basis on which conformity is being declared

The products identified above comply with the requirements of the above EU directives by meeting the follow-
ing standards:
• Safety compliance: EN 60950
• EMC compliance: EN 55022, EN 55024
• ETSI TBR3 (BRI)
• TBR4 (PRI)
The CE mark was first applied in 2000.
Electromagnetic Compatibility Directive amended by 92/31/EEC & 93/68/EEC
Low Voltage Equipment Directive amended by 93/68/EEC
During the transition period, products may not comply with the Low
Voltage Directive.
19