Patton electronics SmartNode Series Software Configuration Manual page 549

SmartWare Software Configuration Guide
no-silence-suppression
) | (g727-24k
(rx-length <rx-length> )
(tx-length <tx-length> )
silence-suppression
no-silence-suppression
) | (g727-32k
(rx-length <rx-length> )
(tx-length <tx-length> )
silence-suppression
no-silence-suppression
) | (netcoder-6k4
(rx-length <rx-length> )
(tx-length <tx-length> )
silence-suppression
no-silence-suppression
) | (netcoder-9k6
(rx-length <rx-length> )
(tx-length <tx-length> )
silence-suppression
no-silence-suppression
) | (g729
(rx-length <rx-length> )
(tx-length <tx-length> )
silence-suppression
no-silence-suppression
) }
[no] high-pass-filter
[no] post-filter
[no] dtmf-relay
[no] rtp payload-type nte <value>
[no] dtmf-mute-encoder
[no] silence-suppression
dejitter-mode {adaptive|static|static-data}
dejitter-max-delay <dejitter_max_delay>
dejitter-max-packet-loss <dejitter_max_packet_loss>
dejitter-shrink-speed <dejitter_shrink_speed>
dejitter-grow-step <dejitter_grow_step>
dejitter-grow-attenuation <dejitter_grow_attenuation>
[no] fax transmission [<index> ] {(relay {t38-udp} ) | (bypass
{g711alaw64k|g711ulaw64k} ) }
fax redundancy {ls | low-speed } <ls_red> {hs | high-speed } <hs_red>
fax volume {-18.5|-17.5|-16.5|-15.5|-14.5|-13.5|-12.5|-11.5|-10.5|-9.5|-8.5|-
7.5|-6.5|-5.5|-4.5|-3.5}
fax dejitter-max-delay <buffer_size>
[no] fax error-correction
[no] fax hdlc
fax max-bit-rate {2400|4800|7200|9600|12000|14400}
fax detection {ced-tone|fax-frames}
[no] modem transmission [<index> ] (bypass {g711alaw64k|g711ulaw64k} )
modem dejitter-max-delay <buffer_size>
exit
Profiles
C • Command summary
547