Patton electronics SmartNode Series Software Configuration Manual page 481

SmartWare Software Configuration Guide
Mode: Profile VoIP
Step
node (pf-voip)[ name ]#codec g729 tx-
1
length 30 rx-length 30 silence-
suppression
Procedure: Remove a codec from the list
Mode: Profile VoIP
Step
node (pf-voip)[ name ]#no codec g729
1
Procedure: Insert a codec at a specific position in the list
Mode: Profile VoIP
Step
1 node (pf-voip)[ name ]#codec 1 g729 tx-
length 30 rx-length 30 silence-suppres-
sion
VoIP profile configuration task list
Command
Command
Command
40 • VoIP profile configuration
Purpose
Appends codec g729 to the list of codecs. Speci-
fies the payload duration for transmitted RTP pack-
ets of this codec, and the maximum supported
payload duration for received RTP packets of this
codec. Allows silence suppression to be used with
this codec.
If the codec g729 already existed in the list, its
parameters are updated with the entered values.
The following codecs are available:
g711alaw64k
•
• g711ulaw64k
g723-5k3
•
• g723-6k3
g726-16k
•
• g726-24k
g726-32k
•
• g726-40k
g727-16k
•
• g727-24k
g727-32k
•
g729
•
netcoder-6k4
•
netcoder-9k6
•
transparent
•
Purpose
Remove codec g729 from the list of codecs.
Purpose
Inserts codec g729 at the first position of the list
(most preferred codec). The parameters are the
same previously described.
If the codec g729 had yet existed in the list, it is
moved to the first position of the list, adopting the
entered parameter values.
479