Displaying The Cli Version; Displaying Account Information; Switching To Another Account - Patton electronics SmartNode Series Software Configuration Manual

4 • Accessing the CLI

Displaying the CLI version

This procedure displays the version of the currently running SmartWare CLI.
Mode: Operator execution
Step Command
1 node> show version cli
Example: Displaying the CLI version
The following example shows how to display the version of the current running SmartWare CLI on your
device, if you start from the operator execution mode.
SN>show version cli
CLI version : 3.00

Displaying account information

You can use the show command in the SmartWare to display information about existing administrator and
operator accounts. This command is not available for an operator account.
The following procedure describes how to display account information:
Mode: Administrator execution
Step Command
1 node# show accounts
Example: Display account information
The following example shows how to display information about existing administrator and operator accounts.
SN#show accounts
administrator accounts:
super
operator accounts:
support

Switching to another account

A user can use the su command to switch from one user account to working in another. With this command, a
user can change from his current account to another existing account 'name'. After executing su with the
account name to which the user wants to change as argument, he must enter the password of the particular
account to get privileged access.
Mode: Administrator or operator execution
Step Command
1 node> su account-name
54
Displays the CLI version
Displays the currently-configured administrator and operator
accounts
Changes to the user account account-name .
SmartWare Software Configuration Guide
Purpose
Purpose
Purpose
Accessing the SmartWare CLI task list