Load An Image Into Ram So That It Can Be Started; Re-Initialize Flash Image Store - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide

Load an image into RAM so that it can be started

Step 1 fis load [-b memory_load_address ]
[-n index ]

Re-initialize Flash image store

Note
All images are removed during this process.
Step 1 fis init
Other
Command
Command
Purpose
Loads an image into RAM.
-b: Memory address to load image to. If this param-
eter is omitted, the loading address will be taken
from the image file.
-n: Index of image to load (Default: 1).
Purpose
Re-initializes Flash image store. All memory is
erased and all images are removed.
The command asks for confirmation, before it starts
erasing.
C • Command summary
553