Configuring Basic Dyndns Settings; Configuring Advanced Dyndns Settings (Optional); Defining A Mail Exchanger For Your Hostname - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
Configuring basic DynDNS settings
The following procedure describes the steps necessary to enable the DynDNS feature.
Mode: DynDNS
Step
1 node(dyndns)#authentication user pass-
word
2 node(dyndns)#service
{dynamic|static|custom}
3 node(dyndns)#hostname name
4 node(dyndns)#observe ip-interface-name
Example: Configuring DynDNS
The following example shows the necessary steps required for a basic working configuration of the
DynDNS client.
SN>enable
SN#configure
SN(cfg)#context ip
SN(ctx-ip)[router]#dyndns
SN(dyndns)#authentication Bob 245gf46te
SN(dyndns)#service dynamic
SN(dyndns)#hostname myhostname.dyndns.org
SN(dyndns)#observe eth1
Configuring advanced DynDNS settings (optional)
Defining a mail exchanger for your hostname
If required, you can define a mail exchanger or a backup mail exchanger for your hostname on the
DynDNS server.
Mode: DynDNS
Step Command
1 node(dyndns)# mail-exchanger
hostname [backup-mx]
DynDNS configuration task list
Command
Defines the host, which is the mail exchanger for your host-
name. If the backup-mx parameter is specified, the mail-
exchanger will be registered as backup mail exchanger only
23 • DynDNS configuration
Purpose
Defines the authentication credentials of your
DynDNS account
Defines the DynDNS service to use
Defines the hostname that will be assigned to the
SmartNode
Defines the IP interface to observe for IP address
changes. When the IP address on this interface
changes, the hostname to IP address mapping on
the DynDNS server will be updated
Purpose
261