Configure H.235 Security (Optional) - Patton electronics SmartNode Series Software Configuration Manual

38 • H.323 gateway configuration
Mode: Gateway H.323
Step
1
node (gw-h323)[h323]#gatekeeper-discov-
ery auto [gkid]
or
node (gw-h323)[h323]#gatekeeper-discov-
ery manual ip-address ip-port [gkid]
2
node (gw-h323)[h323]#alias h323-id name
or
node (gw-h323)[h323]#alias e164 number
3
4
node (gw-h323)[h323]#supported-prefix pre-
fix
5
6
node (gw-h323)[h323]#ras
Example: Configuring RAS
The following example shows how to configure the registration authentication service (RAS) for a SmartNode
in an H.323 network.
SN>enable
SN#configure
SN(cfg)#gateway h323 h323
SN(gw-h323)[h323]#gatekeeper-discovery auto
SN(gw-h323)[h323]#alias h323-id Berne1
SN(gw-h323)[h323]#alias e164 007
SN(gw-h323)[h323]#alias e164 *5
SN(gw-h323)[h323]#alias e164 19421
SN(gw-h323)[h323]#supported-prefix 03198525
SN(gw-h323)[h323]#ras
Configure H.235 Security (optional)
H.235 is an ITU-T Recommendation for security and encryption for H-series (H.323 and other H.245-based)
multimedia terminals. It describes enhancements within the framework of the H.3xx-Series Recommendations
to incorporate security services such as Authentication and Privacy (data encryption).
456
Command
SmartWare Software Configuration Guide
Purpose
Specify that gatekeeper discovery has to be
done automatically
or
Specify the gatekeeper for the SmartNode
explicitly. You can repeat this command to
add multiple gatekeepers.
Add an H.323_ID or E.164 alias for registra-
tion.
Repeat step 2 to add more than one alias to
the configuration.
Add a gatekeeper prefix to be registered on
the gatekeeper
Repeat step 4 to add more than one prefix to
the configuration.
Enable the RAS protocol to make use of gate-
keepers and initiate gateway registration.
Gateway configuration task list