Enabling The Dns Relay - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
You can test the DNS server configuration using the dns-lookup command as follows:
Example: Testing DNS server configuration
SN(cfg)#dns-lookup www.patton.com
Name: www.patton.com
Address: 209.49.110.5

Enabling the DNS relay

The DNS resolver must be configured before you can use the DNS relay feature (see section
DNS resolver" on page 256 to enable the DNS resolver, if you have not already done so).
Do the following to enable the DNS relay feature:
Mode: Configure
Step Command
node (cfg)#dns-relay
1
Example: Enabling DNS relay
The following example shows how to enable the DNS relay feature.
SN>enable
SN#configure
SN(cfg)#dns-relay
DNS configuration task list
Enables DNS relay feature
22 • DNS configuration
"Enabling the
Purpose
257