Patton electronics SmartNode Series Software Configuration Manual page 400

33 • Call router configuration
You can specify a timeout after which the next destination interface is tried when there is no answer at all from
the destination interface.
You can specify drop causes that trigger hunting for the next destination. All other causes (e.g. user busy) will
drop the original call.
Note
Unlike previous versions of SmartWare, now you can hunt a call over differ-
ent interface types, not only over ISDN interfaces. You can, e.g. create a
hunt group to try to call over a H.323 interface and, if this call fails, do a
fallback to an ISDN interface.
Procedure: To create and configure a hunt group service
398
SmartWare Software Configuration Guide
Call router configuration task list