Exiting The Event Log - Visonic PowerMaster-10 G2 User Manual

MAINTENANCE
READY 00:00
1.
ENTER CODE:_
CODE
2.
LIST OF EVENTS
3.
Z13 alarm
09/02/10 3:37 P
4.

Exiting the Event Log

or
1.
<OK> TO EXIT
2.
READY 00:00
58
When the PowerMaster display reads [ENTER CODE: _], enter the current
master user code.
The "Happy Tune" will sound and the PowerMaster display will read [LIST OF
EVENTS]. (see Important Note!)
Click the button. The latest event will be shown.
The event is displayed in two parts, for example, "Z13 alarm" then "09/02/10
3:37 P".
The two displays will be shown alternately until clicking
to the next event or until the event log times out (4 minutes).
Click the button as many times as necessary to read all the required
data.
Important Note! Entering an incorrect code 5 times in a row will initiate a 30-
second penalty lockout of the keypad.
Attention: The system will not allow you to erase the event log. Only the
installer is authorized to view and perform this function.
Click the or
The PowerMaster display will read [<OK> TO EXIT].
Click the button.
The system reverts to the normal operating mode.
button from anywhere within the event log.
D-304829 PowerMaster-10/30 G2 User's Guide
again to move