Exiting The Event Log - Visonic rMaster-360 User Manual

MAINTENANCE
READY 00:00
1.
ENTER CODE:_
CODE
2.
LIST OF EVENTS
3.
Z13 alarm
09/02/10 3:37 P
4.

Exiting the event log

or
1.
<OK> TO EXIT
2.
READY 00:00
50
When the Virtual Keypad display reads [ENTER CODE: _], enter the current
master user code.
The "Success Tune" will sound and the Virtual Keypad display will read [LIST
OF EVENTS]. (see Important Note!)
Click the button. The latest event will be shown.
The event is displayed in two parts, for example, "Z13 alarm" then "09/02/10
3:37 P".
The two displays will be shown alternately until clicking
to the next event or until the event log times out (4 minutes).
Click the button as many times as necessary to read all the required
data.
Important Note! Entering an incorrect code 3 times in a row, and each next
retry, will initiate a 30-second penalty lockout of the keypad.
Attention: The system will not allow you to erase the event log. Only the
installer is authorized to view and perform this function.
Click the or
The Virtual Keypad display will read [<OK> TO EXIT].
Click the button.
The system reverts to the normal operating mode.
button from anywhere within the event log.
D-307082 PowerMaster 360 User's Guide
again to move