Reading The Event Log - Visonic PowerMaster-10 Installer's Manual

8. READING THE EVENT LOG

Up to 100 events are stored in the event log. You can access this log and review the events, one by one. If the event
log fills up completely, the oldest event is deleted upon registration of each new event. The date and time of occurrence
are memorized for each event.
Note: Up to 250 events (PowerMaster-10 G2) / 1000 events (PowerMaster-30 G2) are stored in the event log that can
be reviewed via the Remote Programmer PC software application or by the remote PowerManage server.
When reading the event log, events are shown in chronological order - from the newest to the oldest. Access to the
event log is provided by clicking the
process of the event log is shown below.

Step 1
In normal operating [1]
mode
READY 00:00

Step 5
CLEAR EVENT LOG [5]
display
➯
CLEAR EVENT LOG
- Reading Events
 
While the system is in the normal operating mode, press the
[1]
Reading the Event Log
[2]
Enter the current Installer Code and then press
[3]
The latest event is shown.
The event is displayed in two parts, for example, "Z13 alarm" then "09/02/10 3:37 P".
[4]
Press repeatedly to scroll through the list of events.
Erasing and Exiting the Event Log:
[5]
From anywhere within the event log, press the
[6]
At this stage in the procedure, clicking the
without erasing the event log. Clicking the
Press the
[7]
The system erases the event log
[8] Press to revert to normal operating mode.
Clicking the
Clicking the
D-303222 PowerMaster-10/30 G2 Installer's Guide
button and not through the installer's menu. The reading and erasing
Step 2
Enter Installer Code

ENTER CODE:

LIST OF EVENTS
Step 6
Erase the Event Log
<OFF> to delete
button to erase the event log.
button repeatedly at any stage in the procedure takes you one level up with each click.
button will take you to "<OK> TO EXIT".

Step 3
[2] Reviewing Events
Z13 alarm
09/02/11 3:37 P

Step 7
[6] Event Log is erased
<OK> TO EXIT
key.
to enter "LIST OF EVENTS".
button and then press
buttons will take you to "<OK> TO EXIT"
or
button will revert to "CLEAR EVENT LOG".
8. READING THE EVENT LOG

Step 4
[3] Scroll List of Events
SR2 TAMPER-ALARM
07/02/11 11:49 a

Step 8
[7] Returns to normal
operating mode

READY 00:00
.

[4]

[8]
65