Erasing The Event Log - Visonic POWERMAX Programming Manual

Important! Entering an incorrect code 5 times in a row
will initiate a 30-second penalty lockout of the keypad.
C. Click <OK>. The latest event will be shown. Suppose
that the latest event was an alarm in zone 13. The
display will now read:
Z 1 3 A L A R M
and then:
0 9 / 0 2 / 9 9
The two displays will be shown alternately until you
click <OK> again to move to the next event, or until the
event log times out (4 minutes).
D. Click <OK> as many times as necessary to read all the
data you need.
• To clear the event log, refer to Para. 11.3.
• To quit the event log:
- Click <HOME> or <AWAY> from any-
where within the log. The display will read:
< O K > T O E X I T
- Click <OK>. The system will return to the
normal operating mode.
DE5450P
3 : 3 7 P
Figure 7. Using the Event Log

11.3 Erasing the Event Log

A. From anywhere within the event log, click <NEXT>. The
display will change to:
C L E A R E V E N T L O G
B. Click <OK>. The display will change to:
< O F F > T O D E L E T E
C. Click <OFF>. The "Happy Tune" will sound and the
display will change to:
< O K > T O E X I T
Note: If you change your mind before clicking <OFF>,
click <HOME> or <AWAY>. This will also get you to
"<OK> TO EXIT" without erasing the event log. Clicking
<NEXT> will return you to "CLEAR EVENT LOG".
D. Click <OK>. The system will revert to the normal
operating mode.
19