Performing a Backup Using the NORMAL ATTIME Suspend Function (for Cnt Ac-A)
shows an example of performing a backup using the NORMAL ATTIME Suspend function (for
Continuous Access Asynchronous for Mainframe). The numbers in
to those in the procedure that follows:
Figure 46 Cnt Ac-A Backup Configuration Example Using the NORMAL ATTIME Suspend Function
Before backup using the NORMAL ATTIME Suspend function, the following is the normal status of
each copy group:
For Continuous Access Asynchronous for Mainframe copy groups: DUPLEX
For Business Copy for Mainframe copy groups: SUSPOP
To perform a backup using the NORMAL ATTIME suspend function (for Continuous Access
Asynchronous for Mainframe):
1.
Execute the following command to execute the NORMAL ATTIME suspend function for the
Continuous Access Asynchronous for Mainframe copy group: YKSUSPND ATTIME
(20070101:100000:0000:00,LOCAL)
2.
After the Continuous Access Asynchronous for Mainframe copy group is suspended, execute
the YKRESYNC command for the Business Copy for Mainframe copy group. A backup of the
Continuous Access Asynchronous for Mainframe P-VOL at 2007/1/1 10:00 can be acquired
in the Business Copy for Mainframe S-VOL.
Performing a Backup Using the NORMAL ATTIME Suspend Function (for BC Z)
Figure 47 (page 85)
Suspend function (for Business Copy for Mainframe).
84
Understanding Business Continuity Manager functions
shows an example of performing a backup using the NORMAL ATTIME
Figure 46 (page 84)
correspond