Making A Copy Group - HP XP P9500 Software User's Manual

4. Register a command device to be used for the HSRT3 route on the secondary host.

Making a copy group

1. Make a PPRC (Continuous Access Synchronous for Mainframe) copy pair with HyperSwap
enabled from TPC-R. (If a PPRC copy pair has already been made, this step is not necessary.)
2. On the primary host, define a Continuous Access Synchronous for Mainframe copy group
with the HyperSwap attribute, a Continuous Access Journal for Mainframe copy group, and
a Continuous Access Journal for Mainframe copy group for Delta Resync.
To define a Continuous Access Synchronous for Mainframe copy group with the HyperSwap
attribute, do either of the following:
Execute the YKH2B command
Specify HS for Linkage Option in the Copy Group Attributes panel
For details on the YKH2B command and the Copy Group Attributes panel, see the HP
StorageWorks P9000 for Business Continuity Manager Software Reference Guide.
NOTE:
with the HyperSwap attribute from the Scan Copy Pair Inside Storage System panel.
3. Execute the YKMAKE command to make a Continuous Access Journal for Mainframe copy pair
on the primary host.
186 Configuration Definitions
You cannot create a Continuous Access Synchronous for Mainframe copy group