Adding the copy pair to the copy group (Cnt Ac-J Z)
To add a copy pair to a copy group:
1.
Press the F5=Add key.
The Pair Selection List (Primary) panel appears.
2.
Specify Devn or Volser for the primary site. Alternatively, select the device containing the copy
pair from the list of devices.
When selecting a device containing a copy pair from the list of devices, specify s in the AC
column for the target device.
3.
Press the F5=Second key.
The Pair Selection List (Secondary) panel appears.
4.
Specify Devn or Volser for the secondary site. Alternatively, select the device containing the
copy pair from the list of devices.
When selecting a device containing a copy pair from the list of devices, specify s in the AC
column for the target device.
480 Using the ISPF panels