Display Command; Format; Operands - HP XP P9500 Software User's Manual

Table 90 List of functions of Business Continuity Manager Monitor commands
Command Name
DISPLAY
REPORT
SET
SLEEP
WAKEUP
For the symbols used in the explanation on the format of operator commands, see
in syntax explanations" (page
NOTE:
If it takes a long time to perform an action, there will be a long delay before the operator
command is executed.
Business Continuity Manager Monitor can only accept a maximum of 10 operator commands.
Therefore, do not execute more than 10 operator commands in a row.
Business Continuity Manager Monitor can retain a maximum of 50 commands waiting to be
executed. However, if the number of commands waiting to be executed exceeds 50, an error
occurs.

DISPLAY command

To display the status of Business Continuity Manager Monitor, use the MODIFY DISPLAY command.
This command allows you to display the following information.
Values that are currently effective for the parameters specified in the YKMONOPT file
Values that are currently effective for the parameters specified in the YKMONCG file
Commands waiting to be executed

Format

If both the name of the cataloged procedure for startup and the identification name were specified
in the START command:
MODIFY
1cataloged-procedure-for-startup-name.]identification-name
,DISPLAY 1{OPTIONS|CGDEF|OPCMDS}
If only the name of the cataloged procedure for startup was specified in the START command.
MODIFY
1cataloged-procedure-for-startup-name
,DISPLAY 1{OPTIONS|CGDEF|OPCMDS}

Operands

cataloged-procedure-for-startup-name
Used to specify the name of the cataloged procedure for startup that was specified in the START
command when Business Continuity Manager Monitor was started.
identification-name
Used to specify the identification name that was specified in the START command when Business
Continuity Manager Monitor was started.
Function
Displays the status of Business Continuity Manager Monitor
Outputs the information for the copy groups whose IDs are specified in the
YKMONCG file
Modifies the values specified in the Business Continuity Manager Monitor parameter
files after Business Continuity Manager Monitor has started
Puts Business Continuity Manager Monitor to sleep
Wakes up Business Continuity Manager Monitor
591).
Operator commands available in BCM Monitor 521
"Conventions