Preparing The Hardware (3Dc Multi-Target Configuration) - HP XP P9500 Software User's Manual

Figure 78 Example of a 3DC Multi-Target Configuration

Preparing the hardware (3DC Multi-Target configuration)

Table 37 (page 149)
settings for using Business Continuity Manager in a 3DC Multi-Target configuration.
Table 37 Prerequisite Hardware (3DC Multi-Target Configuration)
Item
Host
Storage system
Link between storage
systems (physical path)
lists the prerequisite hardware and
Description
One unit each for the primary site, local
site, and remote site
One XP12000, XP24000, or P9500 Disk
Array on each site (3 storage systems in
total)
Bidirectional physical path connected by
a FCP cable between the primary site
and local site, between the primary site
and remote site, and between the local
site and remote site.
Table 38 (page 150) lists the storage system
Remarks
–
Only a configuration that has one
storage system for each site is allowed.
Physical paths between the primary site
and local site, and between the primary
site and remote site, must always be
established.
Defining a 3DC Multi-Target configuration 149