Volumes Used For Ng Scans; Copy Types For Which A Copy Group Including Non Gen'ed Volumes Can Be Defined - HP XP P9500 Software User's Manual

An NG scan can be performed on XP12000/XP10000, XP24000/XP20000, and P9500 storage
systems.

Volumes Used for NG Scans

The NG scan uses either a command device or the volume from which disk configuration information
was acquired by a local scan (the first volume in the disk configuration definition file) to acquire
information from the volumes that the OS does not recognize. If you use a command device, set
up a command device and route list before executing an NG scan.
Figure 54 (page 92)
command device or the local scanned volume. The following legend applies to each of these
figures.
Figure 54 (page 92)
Figure 54 Operational Image of an NG Scan When a Command Device is Used
Figure 55 (page 92)
used.
Figure 55 Operational Image of an NG Scan When a Locally Scanned Volume is Used

Copy Types for Which a Copy Group Including Non Gen'ed Volumes Can Be Defined

A copy group of copy pairs involving Non Gen'ed volumes can be defined for copy types Business
Copy for Mainframe and Continuous Access Journal for Mainframe.
92 Understanding Business Continuity Manager functions
and Figure 55 (page 92)
shows an operational image of an NG scan when using a command device.
is an operational image of an NG scan when a locally scanned volume is
show operational images of the NG scan using a