3.
Specify the first Device Address Domain ID of the route, the serial number of the storage system
that the command device belongs to, and the device number of the command device:
To select from a list in the Add Route Entry panel: Continue to step 4.
To enter values directly in the Add Route Entry panel: In the Add Route Entry panel, enter
the values for Device Address Domain, Storage System S/N, and Device Number. Then
proceed to step 8.
4.
Specify s in AC for either Device Address Domain or Storage System S/N.
Selectable pairs of DKC serial numbers and DAD IDs are displayed in the Storage System/
DAD Selection List panel.
5.
Specify s for AC for the selected storage system serial number and DAD ID pair.
The selected storage system serial number and DAD ID are displayed in the Add Route Entry
panel.
6.
Specify s for AC for Device Number.
Defining a route list 461