Specifying The Business Continuity Manager Log Output Destination; Setting Up Storage Systems - HP XP P9500 Software User's Manual

Specifying the Business Continuity Manager Log output destination

Business Continuity Manager collects information about the following three types of operations:
ISPF activity
CLI command-execution parameters and results
Business Continuity Manager execution log data, such as messages, some parameter
information, and time stamps
Business Continuity Manager can output execution log data to the BCM log.
HP recommends that the first thing you do when setting up Business Continuity Manager is specify
a location for this log, although this is optional.
For more information, see
(page 557).

Setting up Storage Systems

This section describes how to set up storage systems using Remote Web Console.
The required settings vary depending on which copy type is used.
the storage systems settings.
For details about how to specify a consistency group ID, see
Table 24 Storage System Settings
Establishing logical
1
paths
Registering consistency group IDs
Creating journal groups
Configuring
arbitration
command devices
Configuring
arbitration paths
Configuring
remote command
devices
1
You can also use the Business Continuity Manager's logical path control function to establish logical paths. For details,
see "The Logical Path Control Function" (page
2
This setting is required to define a BC Z copy group with a consistency group ID or to use the ATTIME suspend function.
3
This setting is required to define an extended consistency group. You can use Remote Web Console to specify this setting.
Legend:
R: Required.
O: Optional.
N: Not required.
In addition to applying the settings in
Usage monitor in advance to use the performance statistics collection function (YKSTATS command)
100 Preparing to use Business Continuity Manager
"Setting the Business Continuity Manager Log Output Destination"
Setting
BC Z
Inter-control unit N
logical path
Inter-disk N
controller logical
path
2
O
N
N
Cnt Ac-S Z
R
N
N
N
N
95).
"Storage System Settings" (page
Table 24 (page 100)
"Consistency groups" (page
Copy type
Cnt Ac-A Cnt Ac-J Z
R N
N R
R N
N R
N O
100), you must start the
summarizes
23).
3