NOTE:
Some of these tasks must be performed for each site in the configuration. For detailed
information, see
Each of the following tasks can be selected from an item on the Main Menu ISPF panel.
Scan each site to acquire information about the volumes; transfer this information to the primary
site. See
Define and establish a set of inter-control unit logical paths or inter-disk controller logical paths.
See
"Creating a path set" (page
Define the Route List. See
Register a command device in a storage system. See
Define a copy group. See
40
Overview of HP P9000 for Business Continuity Manager Software
"Configuration Definitions" (page
"Acquiring volume information" (page
"Defining a route list" (page
"Defining a copy group" (page
126).
430).
439).
457).
"Setting up Storage Systems" (page
477).
100).