Puts Business Continuity Manager Monitor to sleep. You can use the following sub-operands to
specify the points at which Business Continuity Manager Monitor falls asleep and how long it
remains asleep.
label—name ~ <LABEL string up to 32 characters>
Used to specify the label name for ACTION=STOPPOINT that was specified in the YKMONCG file.
If the specified label name does not exist in the YKMONCG file, the SLEEP request is canceled.
sleep-duration ~ <numeric characters> ((1 to 999999))
Used to specify the duration in minutes that Business Continuity Manager Monitor sleeps.
Example
To put the Business Continuity Manager Monitor instance whose identification name is YK to sleep
for the following conditions, enter the command as shown:
Point to put Business Continuity Manager Monitor to sleep: ACTION=STOPPOINT(LABEL1)
Sleep duration: 10 minutes
MODIFY YK,SLEEP LABEL1,10
WAKEUP command
To wake up Business Continuity Manager Monitor, use the MODIFY WAKEUP command.
Format
If both the name of the cataloged procedure for startup and the identification name were specified
in the START command:
MODIFY
1cataloged-procedure-for-startup-name.]identification-name
,WAKEUP
If only the name of the cataloged procedure for startup was specified in the START command.
MODIFY
1cataloged-procedure-for-startup-name
,WAKEUP
Operands
cataloged-procedure-for-startup-name
Used to specify the name of the cataloged procedure for startup that was specified in the START
command when Business Continuity Manager Monitor was started.
identification-name
Used to specify the identification name that was specified in the START command when Business
Continuity Manager Monitor was started.
WAKEUP
Wakes up Business Continuity Manager Monitor. If Business Continuity Manager Monitor is not
sleeping, the WAKEUP request is canceled.
Example
To wake up a Business Continuity Manager Monitor instance whose identification name is YK,
enter the following command:
MODIFY YK,WAKEUP
526 Automatic operation using BCM Monitor