Example Of Importing Pprc Copy Pairs; When Monitoring Pprc Cnt Ac-S/Cnt Ac-A Copy Pairs; When Monitoring Only Pprc Bc Z Copy Pairs - HP XP P9500 Software User's Manual

NOTE:
This function also detects the copy pairs created by Business Continuity Manager. If Business
Continuity Manager and PPRC are used in the same environment, specify a different prefix
for Business Continuity Manager and PPRC so that the copy pairs operated in Business
Continuity Manager and PPRC will not be detected at the same time.
When NOCHECK is specified for HS in the Scan Copy Pair Inside Storage System panel, no
check will be performed to confirm whether HyperSwaps are enabled for the detected PPRC
copy pairs. To exclude PPRC Cnt Ac-S copy pairs for which HyperSwaps are enabled from
the copy group definition file, specify CHECK for HS.

Example of importing PPRC copy pairs

Following are three PPRC copy pair configurations to help explain how to generate copy group
definition files. Note that the following conditions are not indicated in the figures:
Range of device numbers for scanned P-VOLs: 7300 to 730F
Prefix of the configuration files: BCM.MIGRATE
For Cnt Ac-S copy pairs, a check to confirm whether HyperSwaps are enabled for PPRC copy
pairs

When monitoring PPRC Cnt Ac-S/Cnt Ac-A copy pairs

"Example configuration for a PPRC copy pair" (page 248)
Cnt Ac-S copy pair and Cnt Ac-A copy pair are run together.
To monitor PPRC Cnt Ac-S/Cnt Ac-A copy pairs in the example configuration in Figure 6- 1 , specify
the following in the Scan Copy Pair Inside Storage System panel:
Press the Enter key to generated copy group definition files named as follows:
BCM.MIGRATE.GRP.BCMTCS00
BCM.MIGRATE.GRP.BCMTCA00

When monitoring only PPRC BC Z copy pairs

Figure 102 (page 253)
252 Importing copy groups
shows a configuration in which only PPRC BC Z copy pairs are running.
shows a configuration in which a PPRC