Performing An Immediate Backup - HP D6030A - NetServer - E50 Getting Started

Chapter 4
The window displays summary information for the backup configuration,
including the volume(s) designated for backup and the target tape drive.
10. Click Finish to complete the setup.
Replica displays a message indicating that it is updating the Wizard
backup job.
When the update is complete, the configuration you created with the Wizard
becomes the default backup configuration--Replica automatically performs the
verification and backup at the scheduled time.
NOTE
In addition to the automatic backup you configured with the
Wizard, you can also perform an immediate, unscheduled
backup of the same volumes you selected for the configuration.
For more information, see the following section, "Performing
an Immediate Backup."

Performing an Immediate Backup

In addition to the automatic backup you configured with the Wizard, you can use
the immediate backup shortcut to perform an "off-schedule" backup of the same
volumes you designated for regular backup--at any time.
Immediate backup is entirely automatic; when you open the shortcut, Replica
starts, verifies the job, and begins backing up the designated volumes to the tape
currently mounted in the target tape drive.
To perform an immediate backup:
1. Insert a blank tape cartridge in the HP SureStore tape drive.
2. From the desktop or Start menu under the Replica Program Group, open
the immediate backup shortcut.
Replica immediately begins backing up the volumes designated in the
configuration.
During the backup, the Replica Status window provides information about
the current backup operation (and any scheduled backups). Check the
lower left corner of the window for messages about the window and
Replica operations.
3. Click the Progress button in the Status window to track the progress of
the backup.
Configuring An Automatic Backup
23