Assigning A Dummy Device Number - HP XP P9500 Software User's Manual

4. Specify the scan range using the device addresses (CU and CCA) as the remote scan
information.
NOTE:
for all logical devices in the target storage system.
5. Press the F6=Scan key to perform the remote scan.
A remote scan is executed. The CU Selection List for Edit devn panel displays.
NOTE:
system when a scan is performed, and displays the information in the Model column.

Assigning a dummy device number

NOTE: Although dummy device numbers must be unique within the Device Address Domain, the
dummy device number assigned through a remote scan can be the same as the device number for
a device (within a storage system) that is connected to the host.
To assign a dummy device number:
1. In the CU Selection List for Remote Storage Arrays panel, specify e in the AC column.
The Edit Device Number for CU panel displays.
474 Using the ISPF panels
If 00 is specified for Start CU and FF is specified for End CU, information is displayed
Business Continuity Manager automatically determines the model of the storage