Preparing The Software (Caj Attime Suspend) - HP XP P9500 Software User's Manual

Table 66 Hardware Setting Items (CAJ ATTIME Suspend)
Item
Journal group
Journal volume
BC Z C/T group ID
Command device
Logical path

Preparing the software (CAJ ATTIME Suspend)

Table 67 (page 233)
ATTIME suspend function.
232 Configuration Definitions
Description
A journal group is required for each of
the primary and secondary sites.
Timer type: System
At least one journal volume is required
for each journal group.
Set this for the secondary site.
Two command devices are required for
each storage system (four in total).
Forward direction
Each storage system requires one
command device for the route
(Primary -> Secondary).
Reverse direction
Each storage system requires one
command device for the route
(Secondary -> Primary) (optional).
An inter-DKC logical path (bidirectional)
must be established between the primary
and secondary sites.
lists the software settings for using Business Continuity Manager in the CAJ
Remarks
Before performing copy operations, this
item must be set by using the Remote
Web Console.
–
Before performing copy operations, this
item must be set by using Remote Web
Console.
This item must be set if the Remote DKC
Control Function is to be used.
This is required when a reverse direction
command device uses the Remote DKC
Control Function to operate a primary
site storage system from a secondary site.
–