Failover
The failover procedure to be performed when the primary site storage system is in a nonvolatile
failure state is the same as the failover procedure to be performed when the primary site storage
system is in a volatile failure state.
Failback
1.
Recover the primary site storage system from failure.
2.
From the local site, execute the YKDELETE command for the Continuous Access Journal Z
copy pair.
YKQUERY
YKDELETE
YKEWAIT GOTO(SIMPLEX) NOINVALIDCHECK
3.
From the local site, execute the YKRESYNC REVERSE command for the Continuous Access
Synchronous Z copy pair.
322 Maintenance and Troubleshooting Operations
"Failover" (page 315)
in .