Preparing The Configuration Files (Hyperswap) - HP XP P9500 Software User's Manual

Table 48 Storage System Setting Items (HyperSwap) (continued)
Logical path
Delta resync control path

Preparing the Configuration Files (HyperSwap)

Table 49 (page 178)
a 2DC configuration with HyperSwap and Continuous Access Journal for Mainframe configuration.
Table 49 Required Configuration Files (HyperSwap)
Disk configuration definition file
Copy group definition file
178 Configuration Definitions
Item
An inter-control unit logical path
(bidirectional) must be established
between the primary and local
storage system.
An inter-disk controller logical path
(bidirectional) must be established
between the primary and remote
storage system.
An inter-disk controller logical path
(bidirectional) must be established
between the local and remote
storage system.
Add a delta resync control path
(bidirectional) between storage
systems.
lists the configuration files required for using Business Continuity Manager in
Item
Disk configuration definition files are
required on the primary storage
system, local storage system, and
remote storage system.
The following files are required:
Copy group definition files for the
Cnt Ac-S Z copy groups with the
HyperSwap attribute
Copy group definition files for the
Cnt Ac-J Z copy groups
The timer type of the Cnt Ac-J Z
copy group: Local
Copy group definition files for the
Delta Resync pair
For the S-VOL of the Delta Resync
pair, specify the same journal
group as for the S-VOL of the
Continuous Access Journal for
Mainframe copy group, using a
different mirror ID.
Description
Use Remote Web Console or Business
Continuity Manager for the setup.
Use Remote Web Console for the setup.
Description
—
Set this item before starting a copy
operation.
Remarks
Remarks