STOP
1[cataloged-procedure-for-startup-name.]identification-name
If only the name of the cataloged procedure for startup was specified in the START command:
STOP
1cataloged-procedure-for-startup-name
Operands
cataloged-procedure-for-startup-name
Used to specify a name of the cataloged procedure for startup that was specified in the START
command when a Business Continuity Manager agent was started.
identification-name
Used to specify the identification name that was specified in the START command when a Business
Continuity Manager agent was started.
Example
To stop a Business Continuity Manager agent that was started, and whose identification name is
YK, enter the following command:
STOP YK
Return codes
Table 95 (page 546)
agent is stopped.
Table 95 Return codes when a Business Continuity Manager agent is stopped
Return Code (in
decimal)
0
4
8
12
Forcibly stopping a Business Continuity Manager agent
To forcibly stop a Business Continuity Manager agent, use the CANCEL command. When this
command is used, all requests are cancelled, and the Business Continuity Manager agent is instantly
stopped.
Format
If both the name of the cataloged procedure for startup and the identification name were specified
in the START command:
CANCEL
1[cataloged-procedure-for-startup-name.]identification-name
If only the name of the cataloged procedure for startup was specified in the START command:
CANCEL
1cataloged-procedure-for-startup-name
546 Linkage with Replication Manager
lists and describes Business Continuity Manager agent return codes when an
Description
Stopped by using the STOP command
Immediate shutdown (When the child task has terminated or abnormally terminated with a
return code other than 0)
Initialization parameter analysis error
YKLIST DD open error
GETMAIN failure for the tables used by job step tasks
Other initialization errors (other than the initialization parameter analysis error)
No profile has been defined in the RACF FACILITY class.
Business Continuity Manager agent has not started via IKJEFT01