Executing Ykqrypth With Restruct Specified; Manage Copy Groups Panel (Copy Group Operation) - HP XP P9500 Reference Manual
Hp p9000 for business continuity manager software reference guide
Hide thumbs
Also See for XP P9500:
- Software user's manual (608 pages) ,
- Manual (348 pages) ,
- User manual (193 pages)
Advertisement
Table 65 Contents of the Logical Path Status Panel (continued)
Item
Secondary
Status
In the initial state, the information is displayed in ascending hexadecimal order, in priority order
as follows: Primary (port number), and then Secondary (port number).
Executing YKQRYPTH with RESTRUCT Specified
If the AC in the Manage Path Set panel is set to c, the YKQRYPTH command is executed with the
RESTRUCT parameter specified To use this functionality, see the description in the HP P9000 for
Business Continuity Manager Software Users Guide that explains how to acquire path information
from storage system.
If the return code is within the range from 8 to 32, the Confirm Configuration File Update panel
(see
"Confirm Configuration File Update Panel" (page
of the path set definition file. If you press the Enter key in this panel, the YKSTORE command is
executed, and the path set definition file is updated.
NOTE:
When you update the path set definition file, the CU and CCA are also stored in the path
set definition file for a device, assumed by the system, to which I/Os are issued during the execution
of the YKLOAD command.
Manage Copy Groups Panel (Copy Group Operation)
The Manage Copy Groups panel to operate copy groups is displayed when 6 Manage Copy
Groups is selected from the Main Menu panel.
The Manage Copy Groups panel is shown in
Description
Secondary port number
Status of a physical path
NO PATH: No physical path defined.
ESTABLISHED: The physical path has been established.
INIT FAILED: An initialization error has occurred.
TIME OUT: A timeout has occurred.
NO RESOURCES AT PRI: The port at the primary storage system is
invalid.
NO RESOURCES AT SEC: The port at the secondary storage system is
invalid.
SERIAL# MISMATCH: The storage system serial number does not match.
CONFIG ERROR
I/O ERROR: Information could not be obtained due to an I/O error.
MISMATCH: The defined value and the value specified for the storage
system do not match.
Figure 94 (page
175)) is displayed for confirming the updating
112).
Manage Copy Groups Panel (Copy Group Operation)
1 1 1
Advertisement
