A.6 Notes On The Sar Command; A.7 Notes On The Fdisk And Parted Commands; A.8 Notes On The Parted Command - Hitachi XP P9500 User Manual

Hitachi dynamic link manager software user's guide for linux (6.x) (hit5203-96004, october 2011)

Hide thumbs Also See for XP P9500:

Table of Contents

A.6 Notes on the sar Command

Executing the

devices. To obtain statistics about an HDLM device, perform calculations by using the

value of the SCSI device that conforms to the HDLM device. The following is an

example of executing the

Figure A-3: Example of Executing the sar Command

When creating partitions on an HDLM device, only use the

If partitions have been created on an HDLM device using the

command, some of the partitions created by the

command might not be visible to the

that are created using the

the partition information might be corrupt.

command, execute the following command:

# blockdev --rereadpt

HDLM device: The HDLM device name on which the partition was created (for

example, /dev/sddlmad)

command with the

command. Likewise, some of the partitions created by the

command are modified using the

command is used to create partitions on an HDLM device, after issuing

HDLM device SCSI device

A. Notes on Linux Commands and Files

option does not display HDLM

command might not be visible

command. For this reason, if partitions

command or the

SCSI device n

Table of Contents

Dynamic link manager