Hitachi XP P9500 User Manual page 710

Hitachi dynamic link manager software user's guide for linux (6.x) (hit5203-96004, october 2011)

Hide thumbs Also See for XP P9500:

Table of Contents

maintenance contract for HDLM. For details on the

7.2 DLMgetras Utility for Collecting HDLM Error Information.

A parameter value is invalid.

Refresh the host information, and then perform the operation again. If the same

error occurs again, execute the

information, and then contact your HDLM vendor or maintenance company if

you have a maintenance contract for HDLM. For details on the

utility, see 7.2 DLMgetras Utility for Collecting HDLM Error Information.

The acquisition of path information has been aborted, because the path

configuration was changed while the system was attempting to acquire the path

information.

Refresh the host information, check the path status, and then perform the

operation again.

The error monitoring interval and the number of times that the error needs to

occur are conflicting with the automatic failback-checking interval.

Set the intermittent error-monitoring interval to a value that is equal to or greater

than (automatic-failback-checking-interval x

number-of-times-error-is-to-occur-for-intermittent-error-monitoring).

An attempt to acquire the HDLM version information failed.

Re-execute the command. If the same error occurs again, execute the

utility for collecting HDLM error information, and then contact your HDLM

vendor or maintenance company if there is a maintenance contract for HDLM.

For details on the

utility, see 7.2 DLMgetras Utility for Collecting

utility, see

utility for collecting HDLM error

Chapters

Table of Contents

Dynamic link manager