Hitachi XP P9500 User Manual page 702

8. Messages
Details
aa...aa: Name of the utility that the user executed
KAPL15044-I
Processing to add devices to HDLM management succeeded. Command
Line = aa...aa
Details
aa...aa: Name of the utility that the user executed
KAPL15045-E
Processing to add devices to HDLM management has failed. Command
Line = aa...aa
Details
aa...aa: Name of the utility that the user executed
KAPL15046-I
The management status and configuration information of HDLM
devices was successfully displayed. Command Line = aa...aa
Details
aa...aa: Name of the utility that the user executed
KAPL15047-E
An attempt to display the management status and configuration
information of HDLM devices has failed. Command Line = aa...aa
Details
aa...aa: Name of the utility that the user executed
KAPL15048-I
The status of HDLM devices was checked, and then the unusable
devices were successfully removed. Command Line = aa...aa
Details
aa...aa: Name of the utility that the user executed
KAPL15049-E
An attempt to check the status of HDLM devices, and then remove
the unusable devices, has failed. Command Line = aa...aa
Details
aa...aa: Name of the utility that the user executed
KAPL15050-I
An initial RAM disk image file for using an HDLM device as a boot
disk was successfully created. Command Line = aa...aa
678