Hitachi XP P9500 User Manual page 648

8. Messages
aa...aa: Logical device file name of HDLM device
Action
None. For details on the
Managing the HDLM Configuration.
KAPL10350-E
The HDLM driver(s) is not loaded. Refer to the Messages section
of the HDLM User's Guide for instructions to correct this
problem.
Details
An attempt to execute the HDLM-configuration definition utility (
failed because the HDLM driver was not loaded.
Action
Carry out the following process:
1. Execute the following command to load the HDLM driver
# /opt/DynamicLinkManager/bin/dlminsadrv
# modprobe sddlmfdrv
2. Re-execute the
For details on the
Managing the HDLM Configuration.
KAPL10351-E
The specified HDLM-configuration definition utility is invalid.
Operation name = aa...aa, Parameter = bb...bb
Details
An attempt to execute the HDLM-configuration definition utility (
failed because the specified operation name (aa...aa:) or parameter (bb...bb) was
invalid.
aa...aa: Operation name
bb...bb: Parameter
Action
Confirm that the operation name and parameter are correct, and then re-execute
the
dlmcfgmgr
Utility for Managing the HDLM Configuration.
624
utility, see 7.3 dlmcfgmgr Utility for
dlmcfgmgr
utility.
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for
dlmcfgmgr
utility. For details on the utility, see 7.3 dlmcfgmgr
dlmcfgmgr
)
dlmcfgmgr
)
dlmcfgmgr