Hitachi XP P9500 User Manual page 645

This message checks whether you want to change the configuration definition of
an HDLM device.
Action
Enter to continue. Enter
y
KAPL10340-E
Several processes failed. See the aa...aa file. Check the message
output before this message.
Details
Some processes in the execution of the HDLM-configuration definition utility
(
dlmcfgmgr
aa...aa: File name
Action
See the
/var/opt/DynamicLinkManager/log/dlmcfgmgr1.log
check the message output before this message. For details on the
utility, see 7.3 dlmcfgmgr Utility for Managing the HDLM Configuration.
KAPL10341-I
The HDLM device configurations have been changed.
Details
The configuration of a HDLM device was changed by execution of the
HDLM-configuration definition utility (
Action
None. For details on the
Managing the HDLM Configuration.
KAPL10343-I
HDLM has detected and registered a new HDLM device. HDLM device
= aa...aa
Details
By executing the HDLM-configuration definition utility (
HDLM device has been detected and registered into the HDLM device
configuration definition.
aa...aa: Logical device file name of HDLM device
Action
None. For details on the
Managing the HDLM Configuration.
to cancel.
n
) have failed. Check the file aa...aa.
dlmcfgmgr
dlmcfgmgr
).
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for
dlmcfgmgr
utility, see 7.3 dlmcfgmgr Utility for
8. Messages
file and
dlmcfgmgr
), a new
621