Hitachi XP P9500 User Manual page 576

8. Messages
aa...aa: Option definition file name
Action
Check whether another program is currently using this file (for example, the file
is being opened in a text editor), or whether the file has been inadvertently
deleted.
KAPL04009-E
The option definition is invalid.
Details
HDLM manager could not start normally because some of the definitions in the
option definition file were invalid.
Action
If the KAPL04033-W message is output after this message, execute the
view -sys -sfunc
Use the
dlnkmgr set
them.
If the KAPL04033-W message is not output, restart HDLM manager.
If the same error occurs, re-install HDLM. For details on the
6.7 view (Displays Information). For details on the
(Sets Up the Operating Environment).
KAPL04010-E
Could not open the error log file.
Details
HDLM manager cannot start normally (unable to open the error log file
opt/DynamicLinkManager/log/dlmmgr[1-16].log
Action
Check whether another program is using the file (for example, the file is being
opened in a text editor), or whether the error log file has been inadvertently
deleted.
KAPL04011-E
Could not output the error log file.
Details
The log information could not be output to the error log file
DynamicLinkManager/log/dlmmgr[1-16].log
Action
Make sure that the disk has enough unused capacity.
552
command, and then check the option settings.
operation to return options settings back to where you had
dlnkmgr
operation, see
view
operation, see 6.6 set
set
/var/
).
/var/opt/
.