#1
Key name
auto_failback
auto_failback_interv
al
intermittent_error_m
#3
onitor
intermittent_error_m
onitor_interval
intermittent_error_m
onitor_number
Legend:
Optional: If a key and its setting are not specified, the installer uses the default.
#1
If you are upgrading or re-installing HDLM, the current configuration is applied
for any setting that is not specified.
#2
For details about the functions set by these keys, see 6.6 set (Sets Up the
Operating Environment).
#3
#2
Description
Specify one of the following values to
indicate whether to enable or disable the
automatic failback function for failed paths:
: Enabled (default)
on
: Disabled
off
Specify the interval in minutes from the time
the previous path status check finished until
the time the next path status check started.
You can specify a check interval from
. The default is
.
1440
1
Specify one of the following values to
indicate whether to enable or disable
intermittent error monitoring:
: Enabled
on
: Disabled (default)
off
Specify the interval in minutes that
monitoring for intermittent errors is
performed.
You can specify a check interval from
. The default is
.
1440
30
Specify the number of times an error occurs.
You can specify a value from
default is
.
3
Necessity of
definition
New
installat
ion
Optional
Optional
to
1
Optional
Optional
to
1
Optional
to
. The
1
99
7. Utility Reference
Maxim
um
numbe
Upgrad
r of
e
charac
installat
ters
ion or
re-insta
llation
Optional
3
Optional
4
Optional
3
Optional
4
Optional
2
519