Hitachi XP P9500 User Manual page 539

KAPL09228-W message is output.
(2) Items To Be Defined in an Installation-Information Settings File
The following describes the information defined in the installation information
settings file.
[INSTALLATION_SETTINGS] section
This section defines information that is used when the
executed. Specify this section name at the beginning of the installation information
settings file (although an empty paragraph or comment line can be inserted above this
section name).
Table 7-11: Keys in the [INSTALLATION_SETTINGS] Section lists the keys defined
in the
[INSTALLATION_SETTINGS]
Table 7-11: Keys in the [INSTALLATION_SETTINGS] Section
Key name
Specify the absolute path name of a license key
licensekeyfile
#1 file that is provided in
The default is
If you perform an upgrade installation or
re-installation without updating the license,
delete the
#1 Specify the absolute path name of a license key
licensekey
file that was created by using the following
command:
# echo "
The default is
DynamicLinkManager/dlm.lic_key
If you perform an upgrade installation or
re-installation without updating the license,
delete the
Specify either of the following values to indicate
driver_config
whether to load the HDLM driver and configure
the HDLM device:
: Load the HDLM driver and configure the
y
HDLM device (default).
: Do not load the HDLM driver and configure
n
the HDLM device.
section.
Description
format.
*.plk
/var/tmp/hdlm_license
key and value.
licensekeyfile
license-key license-key-file
" > "
/etc/opt/
key and value.
licensekey
installhdlm
Necessity of definition
New Upgrade
installatio installatio
n
re-install
#2
Optional Optional
.
#2
Optional Optional
"
.
Optional Optional
7. Utility Reference
utility is
Maxim
um
numbe
r of
n or
charac
ters
ation
#2 1024
#2 1024
1
515