Hitachi XP P9500 User Manual page 532

7. Utility Reference
# /opt/DynamicLinkManager/bin/dlmsetopt -r 100000
KAPL12554-I The utility for setting HDLM driver option has
started.
KAPL12555-I The utility for setting HDLM driver option
completed normally.
KAPL12558-I Please restart the computer so that the option
settings take effect.
Example 2:
In this example, the utility displays Help:
Notes:
• The contents specified in the
sddlmfdrv
such as vi. For details on the conf files, see Table 7-8: conf files used by the
dlmsetopt utility.
Table 7-8: conf files used by the dlmsetopt utility
OS
Red Hat Enterprise Linux AS4/ES4
Red Hat Enterprise Linux 5
SUSE LINUX Enterprise Server
Red Hat Enterprise Linux 6
• If you use the
used for the boot disk, after you change the filter driver settings you must
re-create the initial RAM disk image file by executing the
If you change the name of the initial RAM disk image file, change the settings file
for the boot loader so that the re-created initial RAM disk image file is used
during boot-up. For details on this procedure, see Table 7-9: Setting file names
for boot loaders.
508
dlmsetopt
line of the conf files. Do not attempt to edit this line using an editor
/etc/modprobe.conf
/etc/modprobe.d/dlmdrvopt.conf
utility in an environment where an HDLM device is
dlmsetopt
utility are written to the
File Name
dlmmkinitrd
options
utility.