Hitachi XP P9500 User Manual page 518

7. Utility Reference
time once it is recognized. Even if the recognized HDLM device is not available
because this path is disconnected or the LU is deallocated, the path information
for the unavailable HDLM device will not be deleted automatically. Because the
unused HDLM device path information is preserved, newly defined LUs and
added paths cannot be used in some cases. This parameter is useful to eliminate
such a problem.
If you specify this parameter with
disconnected at host boot time but is currently being used, might be assumed to
be deleted. Before executing the
value of
all
utility with the
dlmcfgmgr-utility-log-file-size
-logfs [
Use this parameter to change the size of the
(
dlmcfgmgr[1-2].log
For dlmcfgmgr-utility-log-file-size, specify a value in the range from 1024 to
999999 (in KB).
If the number of LUs to be managed by HDLM is 65 or more or the number of
paths to be managed by HDLM is 129 or more, we recommend that you specify
a value of 10240 KB or more.
When you change the log file size, the size of the current
file is not changed. The next
specified file size.
If you do not specify the log file size for the
is displayed.
Examples
Example 1:
To register the path that HDLM has not identified, by confirming the execution of
the utility:
In response to the confirmation message, enter
to execute the utility.
Example 2:
494
all
dlmcfgmgr
, check the status of the HDLM device to be deleted by executing this
parameter.
-v
).
dlmcfgmgr[1-2].log
, an HDLM device, which was simply
utility with this parameter set to a
]
utility log file
dlmcfgmgr
dlmcfgmgr[1-2].log
file will be created with the
utility, the current setting
dlmcfgmgr
to execute the utility and
y
not
n