Hitachi XP P9500 User Manual page 483

Displayed item
No summary
displayed
#1
-
IEP
#1
-
HCTL
- Paths
- OnlinePaths
Legend:
- : Not displayed
#1
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the
- was specified.
all
- No value was specified for the parameter.
#2
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the
Summary
displayed
The displayed paths are assumed to be in an intermittent error
status and checked whether those paths are to be operated for
automatic failbacks.
One of the following values is displayed for each path:
• : Indicates that intermittent error monitoring is disabled or the
-
monitoring time for an intermittent error is out of range.
• A value of at least 0: Indicates the number of errors that
occurred during intermittent error monitoring.
• : Indicates that an intermittent error occurred (automatic
*
failback does not check the path).
SCSI device configuration information. The following information
is shown in "a.b.c.d" format:
a: Host port number (hexadecimal number)
b: Bus number (hexadecimal number)
c: Target ID (hexadecimal number)
d: Host LU number (hexadecimal number)
Total number of the paths recognized by HDLM for the LU to be
displayed.
Number of available paths in the displayed paths, indicated by a
decimal number. When the value of
OnlinePaths
is less than that of
should check the offline paths and take appropriate action for any
paths that have an error status.
Description
Paths
, all paths are online. If the value of
, some paths are offline. In this case, you
Paths
-lu -item
-lu -c -item
6. Command Reference
equals the value of
OnlinePaths
parameter.
parameter.
459