Hitachi XP P9500 User Manual page 464

6. Command Reference
Table 6-14: Product ID displayed by the view -path operation.
-iem
Use this parameter to add
about intermittent errors.
-srt {pn|lu|cp}
Use this parameter to sort the path information in ascending order, according
to the specified sorting keys.
The sorting keys are as follows: the first sorting key is the name of the
storage system (
the
-srt
The available parameter values to specify the second sorting key are:
•
•
•
When the
ascending order of AutoPATH_IDs.
-hbaportwwn
Displays port WWN information for the HBAs connected to the storage
system.
-t
Omits the title for each information item.
Example
The following example shows how to display information about the paths
that access a host device whose name is
To display path information, by selecting a display item
-path -item
440
IEP
), the second sorting key is the value specified by
DskName
parameter, and the third sorting key is AutoPATH_ID.
: Path name
pn
: LU number of the storage system
lu
: Port number of the CHA
cp
parameter is omitted, the path information is listed in
-srt
to path information and display information
.
sddlmaa