Hitachi XP P9500 User Manual page 457

(5) To display the format of the view operation
(1) To display program information
-sys [-sfunc|-msrv|-adrv|-pdrv|-lic|-audlog|-lbpathusetimes]
Displays the HDLM program information.
Use one of the sub-parameters (following
information that you want to display. If you do not specify a sub-parameter, the
command displays all of the program information except the information about
the audit log data collection settings and the number of times the same path can
be used for load balancing.
Table 6-10: Displayed Program Information shows the parameters you can
specify and the displayed information.
-t
Does not display the title for each information item.
Table 6-10: Displayed Program Information
Parameter and
program
information to be
displayed
-sfunc
Information about the
HDLM function
settings
Item
HDLM version number
HDLM Version
HDLM SP version number. This item is blank if no SP is
Service Pack
present.
Version
Settings for load balancing
Load Balance
• Setting status:
on
off
• Algorithm:
When the setting status of load balancing is on, one of the
following types of algorithms is used for load balancing is
displayed in the parentheses following
rr
extended rr
lio
extended lio
lbk
extended lbk
) to specify the program
-sys
Description
: Enabled
: Disabled
: The Round Robin algorithm
: The Extended Round Robin algorithm
: The Least I/Os algorithm
: The Extended Least I/Os algorithm
: The Least Blocks algorithm
: The Extended Least Blocks algorithm
6. Command Reference
.
on
433