6. Command Reference
6.6 set (Sets Up the Operating Environment)
The
dlnkmgr
6.6.1 Format
(1) To Set Up the HDLM Operating Environment
/opt/DynamicLinkManager/bin/dlnkmgr set
{-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
|-ellv
|-elfs
|-elfn
|-systflv
|-systfs
|-systfn
|-pchk {on [-intvl
|-afb {on [-intvl
|-iem { on [-intvl
number-of-times-error-is-to-occur
|-lic
|-audlog {on [-audlv
[[ss] [a] [ca]|all]]|off}
|-audfac
|-lbpathusetimes
[-s]
(2) To Display the Format of the Set Operation
/opt/DynamicLinkManager/bin/dlnkmgr set -help
6.6.2 Parameters
(1) To Set Up the HDLM Operating Environment
Table 6-2: Default and Recommended Values shows the defaults and recommended
values for each setting. If you change the value of the
takes effect immediately.
414
command's
operation sets the HDLM operating environment.
set
error-log-collection-level
error-log-file-size
number-of-error-log-files
trace-level
trace-file-size
number-of-trace-files
checking-interval
checking-interval
error-monitoring-interval
audit-log-data-collection-level
facility-value
number-of-path-use-times
]|off}
]|off}
] [-iemnum
] | off }
}
operation, the new value
set
] [-category