4. HDLM Operation
be replaced (path that goes through the HBA to which the Fibre Channel switch
is connected).
For example, to place in Offline (C) status the path that goes through the HBA
with host port number
command:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -hba 0001.0000
While the path that goes through the HBA with host port number
Offline, the status of the path that goes through the HBA with host port number
is Online.
0002
Figure 4-5: When the Status of the Path That Goes Through the Fibre Channel
Switch to Be Replaced Is Offline(C)
2.
Replace the Fibre Channel switch for the path that has been placed in Offline(C)
status.
368
and bus number
0001
0000
, execute the following
is placed
0001