Hitachi XP P9500 User Manual page 387

The paths existing when the HBAs were replaced remain in
2. Execute the
dlmcfgmgr
status.
Because the paths existing when HBAs were replaced are in
a hyphen ( ) is displayed for
-
3. Execute the
dlmcfgmgr
about paths and SCSI devices.
In the parameter, specify an
-u
displayed for
Device
utility (
dlmcfgmgr -v
.
Device
utility (
dlmcfgmgr -u
device for which a hyphen (
HDevName
in step 2. Note that you need to execute the utility for each
4. HDLM Operation
Offline(E)
) to check the HDLM device
Offline(E)
) to delete the old information
-
status.
status,
) is
363