Hitachi XP P9500 User Manual page 371

# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -audlog
Audit Log
Audit Log Category
Audit Log Facility
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time =
#
For details on the displayed items and their descriptions, see 6.7 view (Displays
Information).
(2) Setting Up the Operating Environment
To set up the HDLM operating environment, execute the
operation. This operation allows you to set up the following functions:
• Load balancing
• Path health checking
• Automatic failback
• Intermittent error monitoring
• Error log collection level
• Trace level
• Error log file size
• Audit log data collection
• Audit log facility
• Number of times the same path can be used for load balancing
For details on how to set up each function, see 6.6 set (Sets Up the Operating
Environment).
For example, to set up the log level, execute the
with the
-ellv
enter to execute, or
y
The following is an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr set -ellv 1
KAPL01049-I Would you like to execute the operation? Operation
name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation name
= set, completion time = yyyy/mm/dd hh:mm:ss
yyyy
parameter specified. When the confirmation message is displayed,
to cancel the command.
n
: off
: -
: -
mm dd hh mm ss
/ / : :
dlnkmgr
command's
dlnkmgr
4. HDLM Operation
command's
set
operation
set
347